buy Sildenafil without prescription Zyban without prescription Buy Propranolol Buy viagra super active Aciphex Bactroban no prescription Buy Citalopram buy Pepcid online buy Bactroban Lasix without prescription buy Premarin online Soma

CBG362 NTSC/PAL Color Bar Generator

$325.00

Only 2 left in stock (can be backordered)

SKU: CBG362-1 Categories: ,

Description

The CBG362 series of color bar and test signal generator build on the standard set by our popular CBG310, CBG350 and CBG360 series with additional features and similar cost. The CBG362 unit will replace the CBG310F, CBG310S and CBG360 units.

The CBG362 is designed to provide an accurate and affordable signal source for system testing. It also provides the necessary components for aligning color monitors to the proper brightness, color and hue.

The CBG362 will generate a SMPTE style, split field color bar signal or a full field 100% white signal. The split field signal consists of the seven standard 75% bars including the left most gray bar in the top portion. Below this line is a small row of reverse bars that includes only those colors that have blue in them. This is primarily used for monitor chroma and phase adjustments. The bottom row consists of the standard -I, White, Q, Black and Pluge components. The Pluge signals make it very easy to properly adjust black level (brightness) on a video monitor.

The CBG362 will usually fit in a toolbox with ease and even fit into a pocket. A rack mount kit is also available. Power is provided by a regulated 12VDC source and a small wall plug power module is included with the packaged CBG362 but not with board level products.

The CBG362 operates with both NTSC and PAL video systems, an internal switch selects the video standard. The CBG362 series generate standard composite and S-video encoded signals. The standard output connectors include a BNC connector for the composite output and the standard 4 pin Mini-DIN S-Video connector.

All units may be switched to monochrome mode via an internal switch.

The CBG362 is available as packaged or as board level product. Board level products do not include the power supply and a 5VDC to 20VDC regulated power source must be provided. The standard board level product with a -01 suffix includes the standard video connectors that the cased product uses. For OEM applications, we can provide units with header and other connection types. Custom designed or modified versions are also available. MicroImage Video Systems has designed many custom derivatives of the standard color bar generator to meet the special needs of different applications. We would be glad to help with your application. We have also provided product at the chip level as well. Quantity discounts are available.

The CBG362 has a one year parts and labor limited warranty. All units are RoHS compatible.

Printable Literature

Operation Manual

Key Specifications

Bar Type SMPTE style, split field with reverse bars and pluge (full field can be selected)
Top bar order 75% – Gray, Yellow, Cyan, Green, Magenta, Red, Blue
Reverse bar order 75% – Blue, Black, Magenta, Black, Cyan, Black, Gray
Bottom row -I, White, Q, Black, Pluge (-4, 0, +4), Black
Generation method Digital, ITU-BT656 source, 8 bit, 4:2:2, MicroImage logic circuit
Digital to Analog conversion 10 bit, 2x over sampled (27Mhz)
Modulation Digital
Anti-Aliasing Filter 4th order analog, on all output signals
Internal Adjustments None
Sync system Internal
NTSC/RS170 (North American NTSC Timing),
PAL/CCIR (European Timing)
Master Clock 27.000000Mhz (+/- 25ppm at 25 degrees C)
Chroma Frequency NTSC/RS170 – 3.579545Mhz, PAL/CCIR – 4.43Mhz
Horizontal Frequency NTSC/RS170 – 15.73426Khz, PAL/CCIR – 15.625Khz
Vertical Timing NTSC/RS170 – 59.94Hz, PAL/CCIR – 50Hz
Frame Timing NTSC/RS170 – 29.97Hz, PAL/CCIR – 25Hz
Scan Lines NTSC/RS170 – 525 Total, PAL/CCIR – 625 Total _ Interlaced 2:1
Interlace 2:1 (standard NTSC/PAL)
Genlock Not Available
Output Levels
Composite 1.00Vpp into 75 Ohm
S-Video Y 1.00Vpp into 75 Ohm
S-Video C 0.286Vpp burst into 75 ohm
Output Levels (RGB)
Red, Green, Blue 1.00Vpp into 75 Ohm, with sync (all channels)
Sync Not provided as an external signal
Connectors
Composite BNC Female
S-Video 4 pin mini-DIN Female (standard S-Video connector)
RGB (450 series only) 9 pin D-sub female
Power 2.1mm female coaxial power connector (barrel connector)
Temperature
Operating 0 deg ~ 50 deg C (32 deg – 122 deg F)
Storage -40 deg ~ 60 deg C (-40 deg – 140 deg F)
Humidity
Operating 10% ~ 90% (non-condensing)
Storage 5% ~ 95% (non-condensing)
Power 120VAC Power Adapter included with cased products
(power adapter is not included with board level products)
Voltage 4.5 to 20VDC
Consumption Approximately 75mA typical, 100mA max. at 5VDC, less at higher voltages.
Size 2.75″ (W) x 3.70″ (D) x 1.15″ (H)
70 mm (W) x 94 mm (D) x 29 mm (H)
Weight 5 oz., (142 g)
Country of Origin Manufactured in the USA by MicroImage Video Systems with global components
Power Supply Country of Origin Manufactured in Taiwan or China
Specifications are subject to change without notice
The CBG362 replaces the CBG360, CBG350, CBG310F and CBG310S. The CBG462 replaces the CBG460, CBG450, CBG410F and CBG410S.