12 pin female |
Wire for |
Signal |
Wire for |
15 pin |
1 | Blue Center | NTSC | Blue Center | 2 |
2 | Orange Center | C | Orange Center | 3 |
3 | Brown Center | Y | Brown Center | 4 |
4 | Green Center | R-Y | Green Center | 6 |
5 | Yellow Center | B-Y | Yellow Center | 7 |
6 | Red Shield | RXD | Red Shield | 8 |
7 | Red Center | TXD | Red Center | 15 |
8 | Black Wire | Power Ground | Black Wire | 9 |
9 | Red Wire | +12V | Red Wire | 1 |
10 | Orange & Brown Shield | Ground | Orange Shield | 11 |
Ground | Brown Shield | 12 | ||
11 | Yellow & Green Shields | Ground | Yellow & Green Shields | 13 |
12 | Blue Shield | Ground | Blue Shield | 10 |
* Heat shrink to prevent shorting to other wires
with 1/8" heat shrink.
Use small piece of 3/8" black glue heat shrink after clamp to take
up slack in the shell on the 15 pin male end.
View from solder side:
|
12 pin RM female P/N 150-007-0012 |
15 pin male use 15 pin TS shell P/N 150-010-7152 |
©
1995-2002 MicroImage Video Systems, a division of World Video Sales Co., Inc. |